Disinfection and flushing of filling machine

1. Loosen the upper and lower set screws, remove the injection system for overall disinfection, or disassemble and disinfect and clean separately.
2. Place the inlet pipe in the cleaning solution and start the machine for cleaning.
3. The 500ml model may have errors in actual filling. Use a measuring cylinder to measure accurately before formal filling.
4. The filling machine uses a needle tube, 10 type uses a standard 5ml or 10ml syringe, 20 type uses a 20ml glass filler, and 100 type uses a 100ml glass filler.
Installation precautions
1. After unpacking the machine, first check whether the random technical data is complete and whether the machine is damaged during transportation, so as to solve it in time.
2. Install and adjust the feed assembly and discharge assembly according to the appearance diagram in this manual.
3. Add new lubricating oil to each lubrication point.
4. Use the crank handle to turn the machine to check whether the machine is running in the correct direction (counterclockwise facing the motor spindle). The machine must be protected by grounding.