product instruction

Hot melt adhesive labeling machine is mainly used to stick labels on various containers, suitable for round, square, multi-faceted cans, bottles, paper tubes, etc. It can label the entire circumference, or less than the entire circumference or the entire body. It is widely used in food and beverage, pesticide chemicals, paints and coatings, medicine and health care industries, such as labeling mineral water, beverages, milk, detergents and other products.

product-5120-4876

Details

The labeling station is the heart of the machine. The well-designed labeling station can complete the label constant tension conveying; automatic label deviation correction; internal matching of labeling speed (the composite speed of machine revolution speed and bottle rotation speed); no label delivery function without bottle; no glue application function without label; normal labeling before and after bottle type change;

The specially designed label clamp structure can ensure that the trademark is always elastically pressed on the trademark clamp block.
The compensation structure for trademark cutting can ensure that the trademark is cut off neatly and timely.
The double-axis spiral propulsion mechanism makes the large bottle feeding more stable and the high-speed bottle feeding more smooth.
The material tray structure ensures that the user has the minimum time to change the film material, which makes the effective production time longer and the machine's production efficiency higher.

product-1246-706

The OPP hot melt adhesive labeling machine produced by our company is a new type of rotary, continuous labeling machine. The equipment can automatically adjust the inlet and outlet transmission conditions; the products conveyed by the conveyor belt are evenly separated by the bottle separation screw according to the gap of the star wheel, and then the imported star wheel transports the products to the rotary disk. After the products are fixed by the bottle pressing mechanism and the product mold seat, the products begin to rotate at a certain speed. During the rotation of the products, they are mechanically pre-positioned and positioned and labeled according to the mechanism trajectory.

Device parameter configuration

Device name	Fully automatic linear hot melt adhesive labeling machine
machine type	JL-04-04P
main motor power	2.2KW
Main motor brand	OMITER
controller	Schneider
servo motor	Schneider 1.5KW
PLC module	Schneider
sensor	SICK Schneider
Encoder	SICK
Low voltage electrical appliances	Schneider
Voltage	380V±10%
Frequency path	50Hz
Total power	About 8KW
Labeling type	Single body label
Suitable for bottle type	Round bottle φ40-100mm Height: 80-350mm
label size	Length:125-325mm Height:20-190mm
Gluing method	Roller coating (approximately 10mm at each end of the label)
Use tags	Label
Capacity	0-12000 bottles/hour (round bottles) 500ml calculation
compressed air pressure	0.5-0.8 bar
Compressed air consumption	0.2m³/min
Total Weight	2500Kg
Machine dimensions	305017182080mm(LWH)