Semi-automatic Plastic Bottle Blowing Machine

Semi-automatic plastic bottle blowing machine is suitable for the production of PET plastic bottles. The preform is first placed in the mold, and then the preform is blown into the shape of the mold by compressed air to form a plastic bottle.

Send Inquiry

product instruction

Semi-automatic plastic bottle blowing machine is suitable for the production of PET plastic bottles. First, the preform is placed in the mold, and then the preform is blown into the shape of the mold by compressed air to form a plastic bottle. It is widely used in the production of mineral water bottles, carbonated beverage bottles, juice beverage bottles, cosmetics, etc.

product-800-800

Features

1. Blowing 0.1-6 liter PET bottles (one out of two)

2. Using a two-cavity mold to blow 0.1 liter bottles, the output can reach 850 per hour.

3. Advanced PLC control system, time control can be accurate to 0.01 seconds.

4. Special air storage device.

5. Infrared preform heater.

6. Different heating lamps are equipped with independent temperature control devices to ensure the ideal heating effect of the preform.

7. The direction of the heating lamp can be adjusted according to different preforms.

8. Only one person is required for operation, no special training is required.

9. Simple installation and startup.

10. The scrap rate of finished products is less than 0.3%.

Technical Parameters

Main information	dc-600	MG-880
Bottle origin material	PET	PET
Clamping force	35 T	20 T
Mold opening stroke	230mm	205mm
Maximum stretching stroke	400mm	350mm
Number of cavities	2Cavities	2Cavities
Theoretical output	0.1-6L: 350 BPH , 7-10L: 15 minutes vs. 50 BPH	0.1-2.5L:880 BPH 3-6L:380 BPH
Maximum template area	640×470 mm	515×430mm
Maximum mold thickness	300mm	250mm
Inner distance of four pull rods	445 x 450 mm	360 x 400 mm
Power system
Standard voltage	380v/3PH/50Hz or special order	380v/3PH/50Hz or special order
Heating zone	4 Sections	4 Sections
Total power	15KW	11KW
Container
Maximum volume	0.1-6L(2 Cav) ,7-10L(1Cav)	0.1-2.5L(2 Cav) ,3-6L(1Cav)
Bottle mouth diameter	15-60mm	15-60mm
Bottle diameter	35-220mm	35-220mm
Maximum bottle height	400mm	450mm
Auxiliary machinery
Low-pressure air compressor	8-10Bar	8-10Bar
High-pressure air compressor	30Bar	30Bar
Dimensions, weight
Blowing machine	156 X72 X218cm	148 X60 X213cm
Oven	166 X61 X135cm	137 X61 X134cm
Weight	1T	0.82 Ton