Function introduction of fully automatic bottle unscrambler

The appearance of the fully automatic bottle unscrambler is cylindrical, and the bottom of the outer cylinder is equipped with adjustable feet for adjusting the height and level of the machine. There are one inner and one outer rotating cylinder in the cylinder, which are respectively installed on a set of double-row large-scale plane bearings with teeth. The outer side of the inner rotating cylinder is equipped with a bottle drop groove, and the inner side is equipped with a lifting mechanism equal to the number of bottle drop grooves. The outer rotating cylinder is equipped with a bottle separation groove corresponding to the bottle drop groove. A fixed umbrella tower is installed in the center of the fully automatic bottle unscrambler. When the lifting machine is started according to the bottle shortage signal sent by the bottle detection device installed on the umbrella tower, the bottle falls from the center of the top of the machine onto the umbrella tower and slides to the edge of the umbrella tower and enters the lifting mechanism. The lifting mechanism pushes the bottle into the bottle drop groove under the action of the cam. Each lifting mechanism acts three times for each rotation of the fully automatic bottle unscrambler that is, three bottles in each bottle drop groove fall into the bottle separation groove installed on the outer rotating cylinder, making the operation efficiency of the bottle unscrambler higher. A bottle-moving star wheel is arranged at the bottle outlet to send the bottles into the air conveying channel. The bottle-moving star wheel is connected to the motor main shaft through a synchronous toothed belt.