Raw water tank of water treatment system
The raw water tank is the first checkpoint of water treatment. It must be used when treating more than 1 ton of pure water per hour. The raw water tank can be made of PE plastic water tank or stainless steel water tank. Generally, the water tank volume is configured according to the flow rate of raw water. The water tank should be equipped with a liquid level control start, which can control the booster pump to disconnect the booster pump contactor when there is no water in the raw water tank. The bottom of the raw water tank should be connected to the drain port, and the top of the raw water tank should be connected to the overflow port. If tap water is used, users should purchase a solenoid valve connected to the tap water pipe, which can control the automatic water inlet of tap water. The bottom of the raw water tank should be higher than the booster pump, which can increase the flow rate and facilitate the cleaning of the water tank.